PCB design services require skilled designers who know how to come up with an optimum physical layout for a printed circuit board. They use cutting-edge CAD tools and other PCB design software that helps them create all kinds of board designs. No matter what sort of board and layout is required to be made, it's always going to be a multi-stage designing process starting with schematic capture.
At this point, it would be appropriate to note that the client is usually required to provide the designer with information about at least three basic aspects. One is the aforementioned schematic, although it may also be provided by the client as a netlist file. The netlist is simply a file that contains all the connectivity information for the design, along with descriptions of components used.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Designers must be able to work on complex solutions involving everything from digital and analog to RF circuits and mixed PCBs. The board can be designed as per specifications as a single or double sided board, or a multi-layered one. The size is also likely to vary, and so will other factors such as component quantities and pin densities.
The designer also has to decide the board characteristics. This is the method that must be used for mounting components and creating circuit traces. The most popular technique that is now in use is called surface-mount technology.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
In addition to designing new boards, PCB designers are often called upon to perform other tasks. For instance, one common service is an evaluation of an existing design, its components and the footprint captures. They may also be asked to help out with procuring prototypes, check for availability and price information against the bill of materials.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
At this point, it would be appropriate to note that the client is usually required to provide the designer with information about at least three basic aspects. One is the aforementioned schematic, although it may also be provided by the client as a netlist file. The netlist is simply a file that contains all the connectivity information for the design, along with descriptions of components used.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Designers must be able to work on complex solutions involving everything from digital and analog to RF circuits and mixed PCBs. The board can be designed as per specifications as a single or double sided board, or a multi-layered one. The size is also likely to vary, and so will other factors such as component quantities and pin densities.
The designer also has to decide the board characteristics. This is the method that must be used for mounting components and creating circuit traces. The most popular technique that is now in use is called surface-mount technology.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
In addition to designing new boards, PCB designers are often called upon to perform other tasks. For instance, one common service is an evaluation of an existing design, its components and the footprint captures. They may also be asked to help out with procuring prototypes, check for availability and price information against the bill of materials.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
About the Author:
Read more about PCB Design Services For Electronics Manufacturers visiting our website.
No comments:
Post a Comment